Bectron® SA 70L1-30

adhesive / sealant, ELANTAS Europe

Tab. 1Datasheet values: SA 70L1-30
Chemical baseOne-component condensation cure silicone (Alkoxy), neutral cure
ColourTranslucent
Viscosity44,000 mPa·s
Density1.03–1.13 g/cm³ (23 °C, ISO 2811-1)
CureTack-free 2–10 min (23 °C, 55 % RH); cured < 24 h (3 mm)
Hardness30 Shore A (23 °C, ISO 868)
Thermal conductivity0.2 W/m·K
Operating temperatureTemperature resistance -55 to +200 °C
Tensile strength0.8–1.0 MPa (23 °C, ISO 37)
Water absorption0.01–0.03 % (24 h, 23 °C, DIN EN ISO 62)
Shelf life12 months (5–35 °C)

Manufactured by ELANTAS Europe; ELANTAS Europe’s plants are certified to IATF 16949:2016 (ELANTAS presentation, 07/2024).

Request TDS / SDS

Formed-in-place gasket beads dispensed on a housing lid
Image: Naltek archive
Request SDS / sample
TDS
Technical data sheet (PDF)TDS N° 2055 Rev. 6, 10/2024 · 4 pages, 173 KBAll datasheets →
Delivery
In cartridges about 3 months from order
Documents
Certificate of analysis from ELANTAS

Ask for a sample, a TDS, a quote or a dose calculation

Tell us what you need. We reply within 24 hours, in Romanian or English.

What do you need?

The button opens your email program with the inquiry filled in; you send it from there. We use these details only to answer this inquiry. Privacy notice

Contact directly

Alexandru Nichifor
Sales & technical support

+40 771 709 622

nichiforlx@nalteksolutions.com

Naltek Solutions S.R.L.
Sat Comori, Com. Gurghiu, nr. 81, jud. Mureș 547298