Applications: conformal coating, potting, UV curing and printed electronics

Start from the process on your line. Each application page lists the ELANTAS Bectron® materials, Hoenle AG UV units or VFP inks that fit it. It shows their datasheet values, how the material is applied and how it cures. We advise on the dispensing and curing equipment around the material, and do not sell dispensing equipment.

Conformal coating

40 ELANTAS Bectron® conformal coatings for assembled PCBs. Thin film protects against humidity, condensation and dirt; thick film covers edges and supports components against vibration. ELANTAS gives thin film as usually below 100 µm and thick film as usually between 100 and 500 µm.

Potting and encapsulation

39 Bectron® potting compounds in polyurethane, silicone elastomer, silicone gel, epoxy and polybutadiene. The product pages give mix ratio, pot life and hardness where the TDS states them.

UV curing

Hoenle AG LED curing units at 365–405 nm UV, and at 460 nm for visible-light curing, from hand pens to line arrays. We match the unit to the dose the Bectron® TDS asks for.

Printed electronics

13 VFP Ink Technologies inks for membrane switches, printed heaters, antennas and sensors. For the discontinued Bectron® silver, carbon and UV-insulator inks, VFP has a grade to trial.

Adhesives and sealants for electronics assembly

14 ELANTAS Bectron® adhesives and sealants for electronics assembly. The product pages give base, viscosity, cure and operating temperature where the TDS states them.

Thermal management

Seven Bectron® potting compounds and adhesives whose TDS gives a thermal conductivity of 0.5 W/m·K or more, sorted by that value, with hardness.

Melting resins (hot melt) for encapsulating electronics

10 ELANTAS Bectron® melting resins (hot melt), applied molten at the temperature the TDS gives. For MR 3406 that is 190–200 °C at the nozzle (MR 3406 TDS).

Application note: how each Bectron® material is applied

This note is application know-how: which application method suits which material, so the coating, the potting and the cure work together on your line.

Ask for a sample, a TDS, a quote or a dose calculation

Tell us what you need. We reply within 24 hours, in Romanian or English.

What do you need?

The button opens your email program with the inquiry filled in; you send it from there. We use these details only to answer this inquiry. Privacy notice

Contact directly

Alexandru Nichifor
Sales & technical support

+40 771 709 622

nichiforlx@nalteksolutions.com

Naltek Solutions S.R.L.
Sat Comori, Com. Gurghiu, nr. 81, jud. Mureș 547298