LED Pen 2.0
Simple hand-held UV-LED curing pen for manual workstations and R&D labs.
- Wavelengths
- 365 nm
- Intensity (Hoenle)
- 4800 mW/cm² at aperture; 650 mW/cm² at 5 mm (Hoenle UV Meter, LED sensor)
We offer Hoenle AG UV curing systems in Romania. The 18 LED systems on this page run from hand-held pens to line arrays, conveyors and chambers. They emit UV at 365, 385, 395 or 405 nm, or visible light at 460 nm. The figures are Hoenle’s, from its product flyers (updated 09/25); each entry links to its flyer.
Simple hand-held UV-LED curing pen for manual workstations and R&D labs.
Hand-held UV-LED curing pen with focusing lens system for small areas and very short cycle times.
Portable hand-held UV-LED lamp for curing adhesives over larger areas and fluorescence inspection; plugs straight into mains.
Stackable UV-LED spot curing system with detachable touch display; up to 4 LED heads per unit, up to 20 heads per display.
Compact water-cooled UV-LED flood unit with a 20 × 20 mm exit window.
Compact air-cooled UV-LED flood unit (40 x 40 mm) with integrated controller for tight spaces.
Mid-size air-cooled UV-LED flood unit (100 x 100 mm), standard and high-power versions, gap-free tiling.
Large high-intensity air-cooled UV-LED flood unit (200 x 50 mm), modular for larger areas.
Air-cooled high-intensity UV-LED line array, stackable, for integration into conveyors, indexing and rotary tables.
Water-cooled UV-LED line array; lengths up to 3,000 mm on request; clean-room suitable.
Portable 500 mm UV-LED line light with built-in driver and timer; stackable to any length.
Table-top UV conveyor carrying LED Powerline ACIC, LED Spot 100 IC / HP IC, LED Powerline LC or JetCure LED heads, up to 25 W/cm², tunnel height up to 50 mm.
Compact UV-LED irradiation chamber (approx. 180 mm cube usable space) for lab or manual production, door-interlocked.
UV-LED irradiation chamber with 350 x 350 mm footprint for larger parts, lab or manual production.
Water-cooled COB LED-UV curing system for narrow-web label and flexible-packaging presses (retrofit or new).
Water-cooled LED-UV dryer with focusing optics, for sheet-fed and web print applications.
Water-cooled UV-LED array for intermediate and final curing in printing, 400 V DC supply.
Air-cooled modular UV-LED array (41 mm grid) for printing pinning/final curing, in S (side exhaust) and T (top exhaust) versions.
The Hoenle UV Meter measures both broad-spectrum UV and LED systems. Its LED surface sensor covers 265–485 nm, and it comes with a PTB-traceable certificate. It is the instrument behind Hoenle’s own LED figures.
The UV Disc Integrator rides on the conveyor belt and shows the dose in mJ/cm², from 1 to 999,999 mJ/cm² at ± 5 %. Its LED intensity range is 1–10,000 mW/cm², so close to the window of an ACIC 820 XP at 365 nm the UV Meter is the instrument to use.
Readings from different meters are not directly comparable. When you compare a measured value with a Hoenle figure, note which meter and sensor you used.
Source: Hoenle AG, hoenle.com and the UV Meter flyer.
The coating’s datasheet sets the dose. The lamp’s intensity and the time under it deliver it. Bectron® PT 4600 asks for 2,500–3,500 mJ/cm² UVA. Hoenle states a typical 11,000 mW/cm² at 365 nm for the LED Powerline ACIC 820 XP. If its 20 mm window runs along the belt, a board spends 0.48 s under it at 2.5 m/min, and we calculate about 5,300 mJ/cm².
This is a calculation. Hoenle states no measuring distance for its figure, and mounting the 20 mm side along the belt is our assumption. Working distance and wavelength match lower the dose at the board; a trial on your line confirms whether an LED unit suits the coating. ELANTAS developed PT 4600 for broad UVA curing; LED can work as well. On request we measure the dose on your line during a visit.
Run your own lamp, coating and belt speed in the UV dose calculator, or read the guide to UV dose on a conveyor.
See also: UV curing · Tacky UV coating · Line problems
Tell us what you need. We reply within 24 hours, in Romanian or English.
Alexandru Nichifor
Sales & technical support
nichiforlx@
Naltek Solutions S.R.L.
Sat Comori, Com. Gurghiu, nr. 81, jud. Mureș 547298