Supply chain: from ELANTAS, Hoenle AG and VFP to electronics plants in Romania

Naltek Solutions is based in Gurghiu, Mureș county, in central Romania. Bectron® materials come from ELANTAS Europe in Hamburg, and two potting compounds and their hardener from Collecchio, Italy. Hoenle AG UV curing systems come from Gilching, near Munich. VFP inks come from France. You order from us, and we agree the delivery terms with you for each order.

Supply map

Hamburg, Collecchio, Gilching and France, linked to Naltek in Gurghiu

supplier town · country only · Naltek, Gurghiu

Schematic: supplier towns at their real coordinates, France at country level. The lines show the order path, not transport routes.
  1. Hamburg

    ELANTAS Europe, Hamburg. Bectron® coatings, potting compounds, adhesives and melting resins.

  2. Collecchio

    ELANTAS Europe, Collecchio, Italy. Bectron® PU 4522, PU 4526 and hardener PH 4912.

  3. Gilching

    Hoenle AG, Gilching, Germany. LED and conventional UV curing systems and UV meters.

  4. France

    VFP Ink Technologies, France. Silver, carbon, dielectric and piezoelectric inks.

  5. Gurghiu

    Naltek Solutions, Gurghiu, Mureș county.

    By road we are about 2½ hours from Cluj-Napoca, 3¼ hours from Sibiu and 3½ hours from Brașov. Route planner times without traffic (OpenStreetMap, November 2026).

  6. Romania

    Your plant. We offer Bectron® and Hoenle AG systems in Romania, and VFP inks in Eastern Europe.

Lead times from order

Tab. 1Lead times from order
LineLead time from order (Naltek)
Bectron®8 weeks; SA 70L1-30 in cartridges about 3 months.
Hoenle AG standard units, accessories and spare partsAbout 4–5 weeks; custom systems per quote.
VFP inks5–15 business days.

What we do between the manufacturer and your line

Materials and UV curing equipment from three makers, offered through Naltek in Romania.

Material and equipment choice across three lines
113 Bectron® products, 18 Hoenle AG LED systems and 13 VFP inks. We screen the materials against your requirements in your own numbers and send a property comparison with the datasheets. For the curing step we match the Hoenle AG unit to the wavelength and dose the material needs and to your line.
Documents before you order
TDS and SDS before you order; Bectron® deliveries come with a certificate of analysis from ELANTAS. We sign your NDA before you share drawings or process data.
Samples and trial quantities
A factory pack can be a 30 kg pail when the trial needs 5 l: we ask the manufacturer for samples and trial quantities. VFP samples are 100–500 g.
UV dose, calculated or measured
We calculate the dose from lamp type, lens, working distance and belt speed, or measure it on your line, and compare it with the window in the material’s datasheet. The UV dose calculator does the same check for 11 coatings and inks.
Set-up and trials on your line
At the line we look at the dispensing and curing equipment and the datasheets of the materials in use. For dispensing trials we record the equipment and the parameters (material pressure, dispensing speed, needle diameters), so the manufacturer answers with data. After the trial we go through the results with you and give a recommendation. On-site work is quoted per inquiry.
When the line has a problem
The line-problems page lists 17 symptoms in coating, potting and printing, with the possible causes in the material, the application, the curing equipment and the board, each with its supplier source. Questions about a batch or a cleaner we take to the manufacturer and come back with its answer.
Printed tracks
Each VFP conductive-ink page calculates the expected track resistance from the TDS sheet resistance and your length, width and dry thickness.
Lead times from order
Lead times per line are in the table above. An urgent order in February 2025 was dispatched nine days after the purchase order.
Since 2021
We have supplied or sampled 7 plants in Romania. At an EMS plant we have been a registered supplier since 2022, with repeat orders every year; an electronics plant has reordered its conformal coating every year since 2023. We take part in development projects of automotive Tier-1 teams, with our suppliers.

Bectron® · Hoenle AG · VFP Ink Technologies · Support at your plant · About · Line problems · UV dose calculator

Ask for a sample, a TDS or a quote

Tell us what you need. We reply within 24 hours, in Romanian or English.

What do you need?

The button opens your email program with the inquiry filled in; you send it from there. We use these details only to answer this inquiry. Privacy notice

Contact directly

Alexandru Nichifor
Sales & technical support

+40 771 709 622

nichiforlx@nalteksolutions.com

Naltek Solutions S.R.L.
Sat Comori, Com. Gurghiu, nr. 81, jud. Mureș 547298