VFP SECTR-I01
Silver Electron Chemically and Thermally Resistant, 2-component, VFP Ink Technologies
| Printing | Screen, 79–120 threads/cm; 5–8 µm at 90 threads/cm |
|---|---|
| Cure | 120 °C / 5 min (≤ 10 mΩ/sq/mil); 50 °C / 30 min gives ≤ 25 mΩ/sq/mil |
| Resistivity / insulation | ≤ 10 mΩ/sq/mil |
| Substrates | Untreated and TCA-treated PET, paper; PC, polyimide or PVC depending on the TDS revision: confirm with VFP |
| Shelf life (closed pot, +5…+35 °C) | Components 6 months at room temperature; mixed ink 1 month refrigerated |
| Documented with | ECV003/ECV004 (Silver Electron range) |
Source: the VFP Ink Technologies datasheet (TDS) of each grade; NIR drying and anilox values from VFP’s presentation of April 2026. Values are VFP’s; VFP advises a preliminary test on your substrate.
ELANTAS discontinued its Bectron® printed-electronics inks in September 2026; we help you qualify the VFP equivalent on your screen and substrate.
Expected track resistance
From the sheet resistance in the TDS (≤ 10 mΩ/sq/mil) and your track geometry.
Calculated resistance
Our calculation: R = value per mil × (length ÷ width) × (25.4 µm ÷ dry thickness). Default: the geometry VFP uses for the SE TDS figure (6 cm × 1 mm × 8 µm). On your press, resistance depends on the substrate, the dryer profile and the real deposit thickness.
VFP SECTR-I01
- Samples
- 100–500 g
- Minimum order
- 1 kg per silver ink; 500 g per dielectric; other grades on request
- Lead time
- 5–15 business days from order
Other inks
Ask for a sample, a TDS, a quote or a dose calculation
Tell us what you need. We reply within 24 hours, in Romanian or English.
Contact directly
Alexandru Nichifor
Sales & technical support
nichiforlx@
Naltek Solutions S.R.L.
Sat Comori, Com. Gurghiu, nr. 81, jud. Mureș 547298
